Puffco Peak Pro Flashes White And Red Cross

Cleaning and Maintenance. Do NOT attempt to disassemble the atomizer before submerging fully assembled into ISO. If you encounter a software issue, turn the Puffco Peak off and on. Handle extra care when handling your bubbler, First clean the carb cap and the glass piece by soaking it onto a solution of 91%isopropyl alcohol.

Puffco Peak Pro Flashes White And Red Ring

When in use and you want large cloud production, take several short draws instead of long drags. Drop the fully assembled atomizer into ISO for with a paper towel and set aside. To cycle through these temperature levels simply press the power button once. Your Puffco Peak Vaporizer needs to be cleaned Daily for best performance: -. Never Do The Following: Be mindful of the water level of the glass bubbler. Finally, the aptly named peak temperature setting heats up your concentrates at 600 degrees and has a 25 second heat up time and can vaporize XL loads of concentrates. Leave it in the solution for 30 min to an hour and rinse it with warm water and soap, Dry with a paper towel and set aside.

Puffco Peak 3 Red Flashes

Solid Red Light – Overheating. Be sure not to let any liquid make its way to the battery. Avoid storing the Puffco Peak in places that are extremely hot or extremely cold. The different temperature settings are categorized or named as low, medium, high, and peak. Remove and replace the glass bubbler carefully and do not apply too much force. The Puffco Peak lets you check the battery level so you'd know when it's time to charge your device. The medium heat profile runs at 500 degrees and reaches peak temperature at 20 seconds and works well with medium sized loads of concentrates. I am in contact with support still. Remove the glass bubbler. Edit: I'm so glad this post has helped some people. The battery is represented in three levels.

Puffco Peak Pro Flashes White And Red Cross

Do not overfill the glass bubbler. 5 Flashing Light – Short Circuit. Do not get the base wet – it's electric – it will break. Never store the Puffco Peak with water on the bubbler.

Puffco Peak Pro Flashes White And Red Eye

Avoid heating the atomizer 4 times in a row. WARNING: *After cleaning, allow all parts to thoroughly dry before use. Temperature Settings. Make sure to be careful looking after the LED lights to tell what's wrong with the Puffco Peak.

Puffco Peak Pro Flashes White And Red Spot

Allow the unit to cool down. 3 Red Flashing Light – Low Battery Level. Apart from what the Puffco Peak tells you with its LED lights, here are some of a few things you should avoid when using the Puffco Peak. Puffco Peak 4 unique temperature profiles. Unfortunately for me I have purchased a new chamber(tested on friends Pro, it works) and used another one, so a total of 3, but unfortunately my Peak is still giving me the same error light. This can cause liquid to trickle down to the battery and make its way to some of the sensitive internal circuitry which can cause permanent damage. Lower temperature level is at 450 degrees heating up at 20 seconds and works well with small loads of concentrates. When connecting threaded components, apply enough force and stop when you feel resistance. Puffco Peak is equipped with an LED light system that tells you the actual status of the Puffco Peak. Avoid storing the Puffco Peak on a moist and humid area. Make sure that all the components are completely dry before attaching it to the Puffco Peak body.

Do not overfill the bowl. Here's what you should look out for. Fill it with water just above the air holes. The high temperature level is at 550 degrees and reaches vaping temperature at 25 seconds and works best with large loads of wax concentrates. Take the atomizer and soak onto the same solution you used when cleaning the glass bubbler. High, mostly colored in green means that your battery is around 100 – 60 percent while medium or yellow means that you're running at 60 – 30 percent of battery while low or red means you're at 15 – 0 percent of battery power. Multi-Colored LED Lights.